Specifications

G
Configure iSCSI Boot
174
Install support packages
1. ExtractthecontentsofthePromentumsoftwareinstallationtarballcontainingthe
supportpackages(RPMs).
2. SendallRPMpackagestotheCPMbyenteringthefollowingcommand:
scp<pathtoLinuxRPMpackages>/RPMS/*[e-mail]:/~
3. UsesshtoconnecttotheCPM7.Installallsupportpackagesusingthefollowing
commandforeachrequiredRPM:
rpm‐I<rpmpackage>.rpm
4. ReboottheCPM.
Complete the CPM BIOS configuration
1. EntertheBIOSandre‐enablePostWatchdogandO/SWatchdogTimer .
2. EnableProgressiveBoot.
Note:Duringtheinitialshelfboot,theCPMactivatesandattemptstobootbeforethe
iSCSIdeviceisfullyavailable.EnablingProgressiveBootconfigurestheCPMtoretry
bootinguntilthebootissuccessfuloruntiltheOSwatchdogtimerexpires.
3. EnsurethatiSCSIBootistheonlyenabledbootoption.
4. SavechangesandresettheCPM.