Specifications

121
B
List of sensors
OEM HPM
Event 4Bh OEM EFh
Sensor
Specific
6Fh N/A
00h 00h 00h
Boot Record Corruption
As - --N/A03h
After the application code starts, the H8
reads the boot record from the SEEPROM
and determines if the currently selected
flash bank is the bank indicated in the
boot record. If the selected bank is
incorrect, an event with offset 02h is
logged in the SEL. If the boot record has
an invalid checksum, IPMC logs an event
with offset 00h. If the boot error occurred
during IPMC start-up, an event with offset
01h is logged in the SEL. IPMC updates
the self test results flag prior to logging
these events into the SEL. Otherwise, no
events are generated.
01h 00h
Bits 7:4 ==
Currently
executing
application
image
number
01h – Bank 1
02h – Bank 2
Bits 3:0 ==
Image
number
specified in
non-volatile
boot record
(active)
01h – Bank 1
02h – Bank 2 Boot Failure Error
02h
Currently
executing
application
image #
01h – Bank 1
02h – Bank 2
Corrupted
application
image #
01h – Bank 1
02h – Bank 2
Application Image
Corruption
Table 35. Managed sensors (continued)
Sensor
name
Sensor number
Sensor
type
Event/
reading
type
Normal reading
Event
offset
ED1
[3:0]
Event data
Event
Assert/Deassert events Readable value/offsets Rearm Standby Polling time (seconds) SDR type
NotesByte 2 Byte 3