Specifications

106
B
IPMI Commands and Managed Sensors
RTM FRU
Hotswap 02h
PICMG Hot
swap event
F0h
Sensor-
specific
6Fh
00h-
07h
00h
Per PICMG
3.0 spec
Per PICMG
3.0 spec
M0 – FRU not installed
As Yes A X 0.2 01h
Returns the M0 through M7 ATCA hot
swap states for the RTM.
01h
M1 – FRU inactive
02h
M2 – FRU activation
request
03h
M3 – FRU activation in
progress
04h
M4 – FRU active
05h
M5 – FRU deactivation
request
06h
M6 – FRU deactivation in
progress
07h
M7 – Communication lost
Version
Change
1
03h
Version
change 2Bh
Sensor-
specific
6Fh
00h-
07h
Firmware or software
change detected with
associated entity.
Informational. Success or
failure not implied.
As Yes A X 0.2 01h01h
02h -
management controller
firmware revision
07h -
management controller
firmware boot block
08h -
other management
controller firmware
Ejector
Closed 04h
Slot or
connector
21h
Digital
discrete
03h 1 - - - - Yes AX0.201h
01
Ejector latch is
open, Fault Status
asserted
Ejector latch is
closed, Identify
Status asserted
Table 35. Managed sensors (continued)
Sensor
name
Sensor number
Sensor
type
Event/
reading
type
Normal reading
Event
offset
ED1
[3:0]
Event data
Event
Assert/Deassert events Readable value/offsets Rearm Standby Polling time (seconds) SDR type
NotesByte 2 Byte 3