Specifications

D
Updating the BIOS on the CPMs
64
For ATCA-4500, ATCA-4550, and ATCA-4555 CPMs
Updating the main BIOS from the Linux command line
1. Verifythersysbflashutilityandtheamifldrv_mod.okerneldriverareinstalled.See
PreparetheCPMsfortheupdateonpage 62forinstallationinstructions
2. CopytheBIOS.ROMfilefromthe
firmware/biosfolderoftheoperatingsystemupdate
bundletoalocationthatisaccessibletothersysbflashutility.
3. RunrsysbflashtoupdatetheBIOSandretainthecurrentBIOSsettings:
rsysbflashBIOS.ROM/p/b/x
Updating the BIOS from EFI shell
1. CopyAFUEFIx64.efi,BIOS.rom,andupdate.nshtoaUSBflashdriveandbootintotheEFI
shell.Thefi lesarelocatedinthe
firmware/biosfolderoftheoperatingsystemupdate
bundle.
2. SwitchtothefilesystemontheUSBflashdrive(usuallyfs0:).
fs0:
3. Runtheupdate.nshbatchfiletoupdateonebank.
4. ReboottheCPMtotheupdatedbank.
5. Runthebatchfileagaintoupdatetheremainingbank.
6. EntertheBIOSconfigurationandverifythatbothbankshavetheproperBIOSversion.
For ATCA-4616, ATCA-4618, and ATCA-4648
Updating the main BIOS from the Linux command line
1. Verifythersysbflashutilityandtheamifldrv_mod.okerneldriverareinstalled.See
2. CopythefileME_BIOS.binfromtheOSupdatebundle’sfirmware/biosfoldertoalocation
accessibletothersysbflashutility.
3. RunrsysbflashtoupdatetheBIOSandretainthecurrentBIOSsettings:
rsysbflashME_BIOS.bin/p/b/x
4. ReboottheCPM.
5. RunrsysbflashtoupdatetheManagementEngine:
rsysbflashME_BIOS.bin/opr
6. PowerdownthesystemtotheM1stateandthenpoweritupagain.