Specifications

B
Updating and Customizing FRU Data
50
Procedure:
FromaLinuxhostwithLANaccesstotheShelfManager,updatetheFRUdatabyentering:
fru_update"‐Ilan‐H<Shelf_Mgr_IP>‐ANONE‐t<IPMB>"<cfg_file><FRU_image>
Scriptfiles(filesendingwith.sf)verifythetypeofFRUbeingupdatedagainstthefiles
providedbeforewritingthedata.
IfyouareupdatingaFRUdirectlyfromtheShelfManager,usethisformat:
fru_update"‐t<IPMB>"<cfg_file><FRU_image>
Examples:
ThefollowingcommandmakesanRMCPconnectiontotheShelfManageratIPaddress
10.2.113.36andtargetsmoduleaddress0xE4ontheIPMB(anATCA‐2210).
fru_update"‐Ilan‐H10.2.113.36‐Anone‐t0xE4"
ATCA‐2210‐FRU‐v01‐01.cfgATCA‐2210‐FRU‐v01‐01.bin
ThiscommandupgradestheATCA‐6000chassisFRU:
fru_update"‐t0x50"ATCA‐6000‐FRU‐v01‐06.cfgATCA‐6000‐FRU‐v01‐06.bin
ThiscommandupgradestheFRUdataonanATCA‐4616CPM:
fru_update“‐t0x50”ATCA‐4616‐FRU‐v00‐03.cfgATCA‐4616‐FRU‐v00‐03.bin
<Shelf_Mgr_IP>
TheIPaddressoftheactiveShelfManager.
<IPMB>
TheIPMBaddressoftheFRUtoupdate.TheIPMBinformationis
availableineachshelf’sreferencemanualandisalsodescribedinthe
ATCACommandLineInterfaceReference.Toupdateashelf’sFRU
device,usetheIPMBaddressofaproxyFRUthatgivesaccesstothe
shelfFRUdevice.UsetheproxyFRUforyourshelfmodel.
•ForATCA‐6000,usetheIPMBaddressofthevirtualSPMifan
ATCA‐5010orATCA‐5014isinstalled.
•ForATCA‐6006,useaPEMaddress.EachshelfFRUdevicemustbe
updatedseparately.
•ForATCA‐6014andATCA‐6016,usethevirtualRCMaddress,
whichupdatesbothshelfFRUdevices.
<cfg_file>
ThenameoftheFRUdataupdateconfigurationfileendingin.cfg.For
example,theFRUdataupdateconfigurationfileonanATCA‐4648
CPMis:
ATCA‐4648‐FRU‐v00‐03.cfg
<FRU_image>
ThebinaryFRUdatafileendingin.bin.Forexample,thebinaryFRU
datafileonanATCA‐4648CPMis:
ATCA‐4648‐FRU‐v00‐03.bin