Specifications

2
Performing Updates Using rsys_swm
28
ThepossibleSDKssupportedfortheATCA‐7220sarelistedbelow:
IfnoSDKisspecifiedfortheATCA‐7220,theSDK1.7bundleisusedfortheupdate.
Optional configuration and actions
phase tag
Thistagspecifiesthephases.WithoutphasesSMLwillupdateallthemodulesinshelf,except
theactiveShMShost.
Thefollowingoccursduringeachupgradephase:
•Theupdatebundlesareidentifiedanddownloadedinparallelonallthemodulesinthe
group.Updatetoolsandutilitiesinthebundleareinstalledforuseduringtheupgrade.
•Allnon‐excludedprogrammabledevicesareinstalled inparallel,wherepossi ble, onall
modulesinthegroup.
•Allmodulesinthegroupareactivatedinparallel.
•Theupdatedprogrammabledevicesoneachmoduleareactivatedinsequence,whichis
definedbytheor derthattheirassociatedFUMIsarelistedbythemodule’sBladeHSD.
Thefollowingisspecifiedforeachphase:
•Thelistofthemodulestoupgrade
•Anyprogrammabledevicestoexcludefromtheupgrade
step tag
Thistagspecifiestheparallelupdateswithineachphase.Astepdefinesamoduleoragroup
ofmodulesofaspecifiedtypeofidentity.Astepcanalsospecifytheprogrammabledevices
toexcludefromtheupgrade.
Eachstepcanhave onlyonemoduletagspecified.
Table 5. SDKs for the ATCA-7220s
Parameter Description
SDK1.7 Software development kit, version 1.7
SDK1.9 Software development kit, version 1.9
SDK 2.1 Software development kit, version 2.1