Specifications

2
Performing Updates Using rsys_swm
27
Required configuration
releaseuri tag
ThistagspecifiestheURIoftheupdaterepositoryontheupdatehost.Thisisthemount
locationofthereleaseCDISOimageortherootoftheupdaterepositorywheretheISOis
mounted.
Thesoftwarebundlesmus tbeaccessiblefromtheupdat etarg ets(i.e.,modulesand
components)usingtheURIspecifiedfortheupdaterepository.TheIPconnectionsareshown
inthefo llowingdiagram:
Figure 3. IP connections
Currentlyonly“file://”URIsaresupportedandthisisthereasonwhytherepositorymustbe
setupormountedlocallyontheupdatehost.ThisparameterisrequiredbecausetheSML
usesthebundlemapfilelocatedintherepositorytoidentifythesoftwarebundlesforthe
modules.
os tag (CPMs and ATCA-7220 PPMs only)
Variousbundlesareavailableforsomemodule,basedontheoperatingsystemorthe
softwaredevelopmentkit(SDK).TheOStagiswhereyouspecifytheappropriatebundle.
Currently,thistagisonlyrequiredfortheATCA‐45xxseriesCPMs,theATCA‐46xxseriesCPMs,
andtheATCA‐7220PPMs.
ThepossibleoperatingsystemssupportedfortheCPMsarelistedbelow:
Important!AnoperatingsystemmustbespecifiedfortheCPMs.Nobundlewilldownload
andtheupgradeprocesswillfailifanoperatingsystemisnotspecified.
Table 4. Operating systems for the CPMs
Parameter Description CPM product support
mv5_64 Monta Vista, version 5, 64 bit ATCA-45xx series
mv6_64 Monta Vista, version 6, 64 bit ATCA-46xx series
wr2_32 Wind River, version 2, 32 bit ATCA-45xx series
wr2_64 Wind River, version 2, 64 bit ATCA-45xx series
wr4_64 Wind River, version 4, 64 bit ATCA-45xx series, ATCA-46xx series
rh5_64 Red Hat, version 5, 64 bit ATCA-45xx series
rh6_64 Red Hat, version 6, 64 bit ATCA-46xx series
Target
module
Host running rsys_swm
tftp/ftp/www server
containing update bundle
IP address
(example: 10.10.10.1)
IP address
(example:
10.10.10.2)