Specifications

2
Performing Updates Using rsys_swm
22
Updates to the Shelf Manager modules
IfyouexecutetheupgradeusingtheShelfManager’sIPaddressagainstashelfwith
redundantShelfManagermodules(e.g.,theATCA‐2210s),theactiveShelfManagermodule
willbeautomatically skipped.OnlythestandbyShelfMangermodulewillbeupdated.
ToupdatetheactiveShelfManagermodule,youcanperformaswitchoverontheShelf
Managermodulesandchangetheiractive/standbystatus.Aftertheswitchover,runthe
updateagainagainstthenewstandbyShelfManagermodule.
Perform a switchover
YoucanuseeitherofthemethodsdescribedbelowtochangetheShelfManager’sstatusand
rolefromstandbytoactive.
FromtheCLIoftheShelfManager,enter:
platform‐mgmt
shelf‐mgmt
configureswitchover
FromtheLinuxrootoftheShelfManager,enter:
shmgrswitchover
Updating a non-redundant Shelf Manager module
IftheShelfManagerisnon‐redundant(forexample,hasonlyoneATCA‐2210actingasthe
ShelfManager),youwillneedtoruntheupdateagainsttheBladeHSDontheATCA‐2210.
Important!WhenupdatinganATCA‐2210actingasthenon‐redundantShelfManager,be
awarethattheshelfwillbeunmanagedastheATCA‐2210rebootsfollowingtheactivation
stage.
TheIPaddressoftheATCA‐2210associatedwiththeBladeHSDis:
dtl0:hsd
ThisIPaddressshouldbeprovidedtorsys_swmasthehostipaddress.