Specifications

2
Performing Updates Using rsys_swm
21
CPM-specific recommendations
OnCPMmodules,theinterfacesaresettothefollowingbydefault:
•RSYSHSD_BASE_INTERFACE:eth0
• RSYSHSD_FABRIC_INTERFACE:eth1
• RSYSHSD_SHMS_INTERFACE:eth0
IftheCPMsinyoursystemusebondedinterfacestocommunicatewiththeShelfManager
overtheBaseEthernet,youwillneedtoeditthedefaultparametersandnamethebonded
interfaces.fortheRSYSHSD_BASE_INTERFACEandtheRSYSHSD_SHMS_INTERFACE
parameters.
TheRSYSHSD_FABRIC_INTER FACEisoptional,butifasecondRMCPinterfaceisdesired,a
validinterfacewithconnectivitymustbeassigned.Forexample,thisparametercouldbeset
tothefrontpanelmanagementinterfaceeth0fordirectaccesstotheBladeHSDfromremote
managementhosts:
• RSYSHSD_BASE_INTERFACE=bond0
• RSYSHSD_FABRIC_INTERFACE=eth1
• RSYSHSD_SHMS_INTERFACE=bond0