Specifications

4
Changing Shelf Settings Using HPI
61
Eachofthesetablesisindexedby:
saHpiDomainId,
saHpiResourceId
saHpiResourceIsHistorical
saHpiCtrl*EntryIdobject
ThecontrolnumberisusedasthevalueforeachinstanceofthesaHpiCtrl*EntryIdobject.
Thus,thevalueforthesaHpiCtrl*EntryIdvariableineachtablerowisthesameasthe
valueforthesaHpiCtrl*Numvariable.
ForalistofthetablesandnotificationsthattheHPIsubagentsupports,seetheSoftware
Guide.
Enabling the HPI subagent
YoumustconfigureandenabletheSNMPagentbeforeyouenabletheHPIsubagent.Seethe
SoftwareGuidefordetails.
Note:TheHPIsubagentisnotsupportedontheATCA‐6002shelf.
ToenabletheHPIsubagent,accesstheCLIontheShelfManagermoduleandenter:
blade‐mgmt
config
servicehpiSubagent
TodisabletheHPIsubagent,enter:
blade‐mgmt
config
noservicehpiSubagent
TheRadisyssoftwaresuppliesanSNMPwatchdogtomonit orandrestarttheSNMPagentand
theHPIsubagent.FordetailsonconfiguringandenablingtheSNMPwatchdog,seethe
SoftwareGuide.