Specifications

3
Configuring Shelf Manager and HPI Behavior
52
Configuring log settings
•TheRSYSHSD_LOG_FILEparameteriswhereyoucanspecifythenameofthelogfile.If
youdonotspecifyavalue,thesoftwarechoosesasuitablename.
•TheRSYSHSD_CMDLINE_ARGSparameteriswhereyoucansetverbosityandlogsettings.
Youcanusethefollowingvalues:
Configuring blade HSD interfaces
TheRSYSHSD_BASE_INTERFACEandRSYSHSD_FABRIC_INTERFACEparametersspecifythe
defaultBaseandFabricinterfacesforthebladeHSD.TheshelfHPIserverlistensforHPI
sessionopenrequestsontheseinterf ace s.
Forexample:
RSYSHSD_BASE_INTERFACE=dtl0:2
RSYSHSD_FABRIC_INTERFACE=dtl1:2
TheRSYSHSD_SHMS_INTERFACEparameterspecifiestheinterfacetobeusedfor
communicationwiththeShelfManager.ThisparametermustbesettoeithertheBaseor
FabricinterfaceasdefinedbyRSYSHSD_BASE_INTERF ACEandRSYSHSD_FABRIC_INTERFACE.
Forexample:
RSYSHSD_SHMS_INTERFACE=dtl0:2
Important:FortheATCA‐45xxseriesandtheATCA‐46xxseriesCPMs,therecommendedway
tosetupthebladeHSDistospecifythenameofthebondedinterfaceforthe
RSYSHSD_BASE_INTERFACEparameter.ThisensuresthatthebladeHSDservercanalways
maintainconnectivitytoanactiveShelfManager,regardlessoffailovers.
Keeping blade HPI server processes running
TheRSYSHSD_KEEPALIVEparameterenablesthekeepalivedaemonthatensuresthatthe
bladeHPIserverprocessesarecontinuouslyrunning.
‐‐verbosity[level]
Thedefaultis5.Use3foralessverbosebutinformativedebug
level,6foradebug‐friendlylevel,or7forthemostverbose
debugmessages.Ifyouuseavaluelessthan3,youdonotget
errororinformationmessages.
‐‐maxlog[logsize]
Thedefaultsizeofthelogfileis8000000(8MB).Youcan
increasethelogsize,butthevaluemustbelessthanhalfofthe
amountoffreediskspaceavailable.
YDefault.Enablesthekeepalivedaemon.
N Disablesthisfeature.