Specifications

3
Configuring Shelf Manager and HPI Behavior
44
Disabling the HPI service
TheSHMS_CMDLINE_ARGSparameterin/etc/shmgr.confletsyoudisableHPIservice.
SHMS_CMDLINE_ARGSsetstheShMS‐relatedcommand‐lineparameterspassedtotheShelf
Managerprogramwhenitstarts.
Ifyoudecidetosetthisoption,addittotheSHMS_CMDLINE_ARGSoptionsalreadyspecified.
Configuring RMCP
TheSHMS_RMCP_INTERFACEparameterin/etc/shmgr.confspecifiesthedefault
RMCP‐enabledinterfaceontheShelfManager.OntheATCA‐2210,thedefaultinterfaceis
dtl0.
TheSHMS_LOCAL_RMCP_PORTparameterin/etc/shmgr.confspecifiestheRMCPportforthe
localchannel.ThissettingappliestothestaticIPaddressassignedtothemodule,andnotthe
dynamicshelfIPaddressassignedtotheactiveShelfManager.
WARNING!Donotchangethissettingexcepttosatisfyaspecificrequirement.Itisrecommended
thatyoucheckwithRadisysTec hnical Supportbeforemakingchangesusingthesecontrols.
Keeping Shelf Manager processes running
TheSHMS_KEEPALIVEparameterin/etc/shmgr.confenablesthekeepalivedaemonthat
ensuresthattheShelfManagerprocessesarecontinuouslyrunning.
‐‐nohpi DisablestheHPIservice,whichisnotrecommendedexceptinlimited
debuggingsituations.DisablingHPIcausestheplatform‐managementCLIto
beunavailableandpreventstheuseofHPIapplications.
YDefault.Enablesthekeepalivedaemon.
N Disablesthisfeature.