Specifications

B
IPMI Commands and Managed Sensors
90
Get Control State command (for debug only)
Thiscommandreturnsthecurrentstateofacontrolpin.Table 29isthecommanddescription
oftheGetControlStatecommand.
Disable CFD command
ThiscommandindicatestotheIPMCthattheCFDWatchdogTimerneedstobedisabled.No
databyteisrequired.Table 30isthecommanddescriptionoftheDisableCFDcommand.
Set WDT Reset Type command
ThiscommandallowsaBMCWatchdogtimeoutconfiguredfor"HardReset"tocauseaWarm
ResetoraColdReset.Table 31isthecommanddescriptionoftheRestoreFactoryDefa ults
command.
Table 29. Get Control State OEM command
Data Type Byte Data Field
Data Field
1 FRU ID
2 Control number
Response Field
1 Completion Code
2 Control State
00h = de-asserted
01h = asserted
Table 30. Disable CFD OEM command
Data Type Byte Data Field
Data Field N/A N/A
Response Field 1 Completion Code
Table 31. Set WDT Reset Type OEM command
Data Type Byte Data Field
Data Field 1 Reset Type Configuration:
1 = Warm Reset,
0 = Cold Reset
Response Field 1 Completion Code