Specifications

B
Appendix
86
IPMI Commands and Managed Sensors
IPMI command interfaces
ThefollowinginterfacesuseIPMIcommandsupport:
•I
2
Cbusconnectionswiththefollowinglinks:
•I
2
Cbus0‐IPMB0‐A
•I
2
Cbus1‐IPMB0‐B
•I
2
Cbus2‐accesstoIPMCFPGA,CCFPGA,andRTCcircuitry
•I
2
Cbus3‐accesstovoltagemonitoring,MXM,andPCIeretimer
•I
2
Cbus4‐SOLaccess toGbEcontrollerandbase/frontpanelEthernet
•I
2
Cbus5‐accesstoPCH(thermalmonitoring),IPMB‐L,andRTM
•SerialconnectionsusingtheSCIinterface,asfollow:
•SCI1‐linktoanexternaldebugboardviaanonboarddebugheader
•SCIF‐SOLinterfaceviafrontpanelserial(COM)port
•SCI3‐provideslinktoIPMCconsolewhile/ifSCI1linkconnected
•PayloadprocessorlinkimplementedasaKCSport
IPMI commands
Table 26presentsthecommandssupportedbytheCPMindifferentinterfaces.These
commandsar ecompatiblewithIPMIv1.5andPICMG3.0R2.0ECN001.
Table 26. Supported IPMI Commands
IPMI Command name NetFn Code Command Code
Get Device ID App (06h) 01h
Cold Reset App (06h) 02h
Warm Reset App (06h) 03h
Get Self Test Results App (06h) 04h
Set ACPI Power State App (06h) 06h
Broadcast “Get Device ID” App (06h) 01h
Reset Watchdog Timer App (06h) 22h
Set Watchdog Timer App (06h) 24h
Get Watchdog Timer App (06h) 25h
Set BMC Global Enables App (06h) 2Eh
Get BMC Global Enables App (06h) 2Fh
Clear Message Flags App (06h) 30h
Get Message Flags App (06h) 31h
Get Message App (06h) 33h