Specifications

7
Preface
About this manual
ThismanualdescribestheATCA‐46xx,acomputeprocessingmodule(CPM),whichisfully
compliantwithAdvancedTCA®(ATCA®).TheCPMisdesignedtobeincorporatedintoHigh
Availability(HA)systemssuchastheRadisysplatformsSYS‐6006andSYS‐6010.
Usethismanualasahardwareref erencefortheoperationandmaintenanceoftheATCA‐46xx
CPM.Themanualalsoprovidesinformationontheelectrical,themechanical,andthe
environmentalaspectsoftheATCA‐46xxCPM.Thematerialpresentedhereisnot
introductory;itisassumedthatyouarealreadyfamiliarwiththeintendeduseoftheATCA‐
46xxCPMinyourorganization’sATCAplatform.
Thesimplifiednames“CPM”and“module”willbeusedinplaceof“ATCA‐46xxCPM”forthe
bodytextintheremainderofthismanual.
Note:Thesoftwarematerialsincesoftwarerelease3.2.0nowresidesintheSoftwareGuide
forManagementProcessorsandGeneralComputingProcessorsandtheCommandLine
InterfaceReference.Thesemanualsconsolidatethesoftwareinformationforthe ATCA
modules.
Where to get more product information
VisittheRadisyswebsiteatwww.radisys.comforproductinformationandotherresources.
Downloads(manuals,releasenotes,software,etc.)areavailableat
www. radisys.com/downloads.
SeethefollowingresourcesforinformationontheCPMnotdescribedinthismanual:
• Install ationandinitialsetupinstructions.TheATCA‐4xxxComputeProcessingModule
InstallationGuideprovides
thestepsforinstallingtheCPMintoashelfandcompletingthe
initialconfiguration.
• Platformhardwareinformation.TheCPMisincorporatedintoplatformsystemssuchas
theRadisysplatformsSYS‐6002,SYS‐6014,andSYS‐6016.Forinformationaboutthe
platformsandtheirshelfhardware,seetheappropriatePlatformHardwareInstallation
GuideandthePlatformHardwareReference.EachInstallationGuideprovidesthesteps
forinstallingandsettinguptheplatform’sshelfandeachReferencedescribesthe
platform’sfeaturesandoperation.
• Commandlineinterface(CLI)referenceinformation.TheCommandLineInterface
ReferencedescribesthemasterCLIanditscommandmodesandserves
asareferencefor
commandsyntaxandoptions.Whenreferencedinthismanual,thesimplifiednameofCLI
Referencewillbeused.