Specifications

4
Operation and Maintenance
67
SOL session open steps
ToopenaSOLsessionfromaremotecomputer:
1. ActivatetheSOLconsolewindow:
rsys‐ipmitool‐I<protocol>‐H<IP>‐Anone‐C0solactivate
TheSOLsessionisestablished.
2. Performanaction(suchaspressingEnter)fromtheSOLconsolewindow.
TheSOLconsolewindowshouldrespond.
SOL session close step
Note:OnlyoneSOLsessioncanbeopenatatimetoasingleCPM.
ToterminateaSOLsessiondirectlyfromtheactiveSOLwindow,enterthesecharacters:
~.
ToterminateaSOLsessionfromanotherwindow,enter:
rsys‐ipmitool‐I<protocol>‐H<IP>‐Anone‐C0soldeactivate
Firmware and software upgrade
TheprocessesofupdatingonboardCPMfirmwareandassociatedsoftwarearecoveredin
separatedocuments.Overallupgradeinstructionsforonboardfirmwareandsoftwareusing
rsys_updatetoolsarecoveredindetailintheATCAFirmwareandSoftwareUpdate
Instructionsdocument .IfusingFirmwareUpgradeManagementInstruments(FUMI)toolsto
performtheupgrade,refertotheATCAFirmwareandSoftwareUpdateInstructionsUsingthe
RadisysSoftwareManagementFrameworkdocumentforupdateinstructions.Ifyouhave
specialupdaterequirements,contactRadisysTechnicalSupportforassistance.