Specifications

3
Software/Firmware Description
56
Table 14liststheRadisysdefaultsettingsfortheIPMImenuoftheCPMBIOSsetup..
Table 14. Radisys default BIOS IPMI menu setup options
IPMI menu
Submenu Setup Item Values [Default]
Top level:
IPMI Menu
BMC Self Test Status [Dynamic update]
POST Watchdog [Enabled] Disabled
POST Watchdog Timeout 30 ... [150] ... 600
POST Watchdog Policy Do Nothing [Reset] Power Cycle
O/S Watchdog Timer [Enabled] Disabled
O/S WDT Timer Timeout 5 minutes [10 minutes]
15 minutes 20 minutes
O/S WDT Timer Policy Do Nothing [Reset] Power Cycle
IPMI Menu:
System Event Log
Enabling/Disabling Options:
SEL Components
[Enabled] Disabled
Erasing Settings:
Erase SEL
[No] Yes, On next reset Yes, On every reset
Erasing Settings:
When SEL is Full
[Do Nothing] Erase Immediately
Custom EFI Logging Options:
Log EFI Status Codes
Disabled [Both] Error code Progress code
IPMI Menu:
System Information
Product Manufacturer [Dynamic update]
Product Name [Dynamic update]
Product Part Number [Dynamic update]
Product Version [Dynamic update]
Product Serial Number [Dynamic update]
Board Manufacturer [Dynamic update]
Board Product Name [Dynamic update]
Board Version [Dynamic update]
Board Serial Number [Dynamic update]
Note: The Radisys default setting for each of the above BIOS setup options is indicated with square brackets ([ ])
surrounding the option or the required entry. If multiple choices are available for a menu item, each choice is
indicated in italics. If there are no required settings for a menu item, that item does not appear in this table.