Specifications

3
Software/Firmware Description
52
Someconfigurationsettingscanresultinhardwareconflicts.Itisimportanttounderstandthe
hardwareconfigurationandresourceneedstopreventconflicts.
Serial Port Console Redirection
COM0:
Console Redirection
[Enabled] Disabled
[Dynamic update] if port is disabled.
COM1:
Console Redirection
Enabled [Disabled]
[Dynamic update] if port is disabled.
Serial Port Console Redirection:
Redirection Via AMI Debugger
Console Redirection
Engineering mode.
[Enabled] Disabled
Terminal Type VT100 [VT100+] VT-UTF8 ANSI
Serial Port for Out-of-Band Management
Windows Emergency Management Services
(EMS)
Engineering mode
Serial Port Console Redirection:
COM 0/1 Console Redirection
Settings
Out-of-Band Mgmt Port [COM0] COM1
Terminal Type VT100 [VT100+
a
][VT-UTF8
b
] ANSI
Bits per second 9600 19200 38400 57600 [115200]
Flow Control [None] Hardware RTS/CTS Software
Xon/Xoff
Data Bits 7 [8]
Parity [None] Even Odd Mark Space
Stop Bits [1] 2
Flow Control [None] Hardware RTS/CTS
VT-UTF8 Combo Key Support [Enabled] Disabled
Recorder Mode Enabled [Disabled]
Resolution 100x31 Enabled [Disabled]
Legacy OS Redirection Resolution [80x24] 80x25
Putty KeyPad [VT100] LINUX XTERMR6
SCO ESCN VT400
Note: The Radisys default setting for each of the above BIOS setup options is indicated with square brackets ([ ]) surrounding
the option or the required entry. If multiple choices are available for a menu item, each choice is indicated in italics. If
there are no required settings for a menu item, that item does not appear in this table.
a
Default for COM0/COM1.
b
Default for out-of-band management port.
Table 12. Radisys default BIOS Advanced menu setup options (continued)
Advanced Menu
Submenu Setup Item Values [Default]