User manual

Symbols
**Empty**, 2-1
Numbers
1770–CD, 2-8
1770–KF2, E-1
1771-AF , 2-9
1771-AS, 2-9
1771-CXT , 2-1 1
1771-DCM, 2-9
1771-KT2, E-1
1771-SN, 2-9
1771-ASB, 2-9
1772-SD, -SD2, 2-9
1775-S4A, -S4B, 2-9
1775-SR, 2-9
1784-CP10, 2-14 , E-6
1784-CP1 1, 2-14 , E-6
1784–CAK, E-7 , E-8
1784–CP , E-1 , E-7 , E-12
1784–CP5, E-1 , E-7 , E-1 1
1784–CP6, E-1 , E-13
1784–CP7, E-1 , E-14
1784–CXK, E-7 , E-9
1784–CYK, E-7 , E-10
1784–KL, E-1
1784–KL/B, E-1
1784–KT , E-1
1784–KTK1, E-1 , E-7
1785–KE, E-1 , E-7
25-pin serial port, E-4
6008-L TV processor, compatibility , 1-9
6008-SQH1, -SQH2, 2-9
6120, E-5
6122, E-5
9-pin serial port, E-3
A
Address Range, SW2, 2-4
Apply port configuration, 6-31
B
Basic configuration, 1-5
block-transfer data
defined, iv
timing, 7-12
C
Cable, specifications, E-7
Cables, E-1
connections for communication boards,
E-1
connections for serial communications,
E-1
pin assignments, E-6
remote I/O, 2-6
serial port, 2-14
specifications, E-7
Channel 0, connecting a programming
terminal, 2-14
Command protocol error codes, 5-8 ,
D-2
Command types, 5-1
continuous-copy-to-VME, 5-1
continuous-copy-from-VME, 5-1
handle-interrupts, 5-1
send-PCCC, 5-1
Commands, 3-7
command protocol error codes, 5-8 ,
D-2
continuous copy error codes, 4-1 1 ,
5-4
continuous-copy commands, 4-10
continuous-copy commands, 5-2
copy operations, notes, 5-3
copy synchronization, 5-4
handle-interrupts, 5-5
response word error codes, 5-8 , D-3
Send-PCCC, 5-7
COMMON.C, sample, B-5
COMMON.H, sample, B-3
Compatibility with the 6008-LTV processor ,
1-9
Compatibility with the PLC-5/40 processor ,
1-9
Configuration, processor , 2-2
Configuration registers, 3-4
command control and lock register , 3-6
command control register , 3-6
Index