User manual

Performance and Theory of Operations
Chapter 7
7-6
Setup #3
NOCV = 1 (VME coprocessor does not constantly read PLC processor)
Copy to global VME RAM off-board the PLC processor at 0x70000
Programming terminal attached to PLC processor monitoring ladder file
Command Minimum msec. Maximum msec. Average msec.
CTV #N7:0 70000 D16 1 4.0 16.0 6.0
CTV #N7:0 70000 D16 500 7.0 18.0 10.0
CTV #N7:0 70000 D16 1000 11.0 21.0 13.0
CFV 70000 D16 #N7:0 1 5.0 15.0 7.0
CFV 70000 D16 #N7:0 500 8.0 19.0 11.0
CFV 70000 D16 #N7:0 1000 11.0 23.0 13.0
SVE 1 55 3.0 14.0 5.0
Setup #4
NOCV = 0 (VME coprocessor constantly read PLC processor)
Copy to global VME RAM on-board the PLC processor at 0xA00000
Programming terminal not attached to PLC processor
Command Minimum msec. Maximum msec. Average msec.
CTV #N7:0 A0000 D16 1 6.0 11.0 7.0
CTV #N7:0 A0000 D16 500 10.0 14.0 12.0
CTV #N7:0 A0000 D16 1000 14.0 18.0 16.0
CFV A0000 D16 #N7:0 1 6.0 10.0 7.0
CFV A0000 D16 #N7:0 500 10.0 14.0 13.0
CFV A0000 D16 #N7:0 1000 14.0 19.0 18.0
SVE 1 55 4.0 8.0 6.0