Service manual

Operations
Service Manual 6200
plus
Series 5
Specifications
Overview
Listed in the table below are the specifications for the 6200
plus
series chassis.
Note:
These specifications are subject to change without notice.
Environmental
Environmental tolerances are listed in the following table:
System
System specifications are listed in the following table:
Operating Non-Operating
Temperature 0 to 45 °C (32 to 113 °F) -40 to 70 °C (-40 to 158 °F)
Humidity 5 — 95% @ 40 °C, non-condensing 0 — 95% @ 40 °C, non-condensing
Shock 1 G @ 10 ms 10 G @ 10 ms
Vibration 0.25 G @ 5 — 200 Hz 1 G @ 5 — 200 Hz
Altitude 15,000 ft (4,572 m) 50,000 ft (15,240 m)
Dimensions
(Figure 3)
•
Benchtop: 17.1” W x 10.5” H x 17.8” D (434 x 267 x 452 mm)
•
Rack-mount: 17.1” W x 10.5” H x 19.1” D (434 x 267 x 485 mm)
•
Tower: 10.5” W x 18.3” H x 17.8” D (267 x 464 x 452 mm)
Note
: The hot-swappable power supply handle adds 1.365” (34.7 mm) to the
depth of the chassis.
Construction Zinc-plate, powder-coated steel
Indicators
and Controls
•
System reset button
•
System power LED
•
Drive activity LED
Note:
Dual reset buttons and LED’s are provided for a split backplane system.
•
Power supply LED
•
Power supply fault Alarm Stop button
Note:
The power supply alarm features function only with the hot-swappable
power supply option.
•
Rocker-style power ON/OFF switch
Keyboard AT-style connector on rear panel
Note:
Dual connectors are provided for split backplane systems.
Peripherals Access for serial and parallel ports on rear panel
Note
: Dual access is provided for split backplane systems.
Cooling
•
Three (3) 90 CFM fans
•
Air filter (removable and washable)
•
A fan within each power supply
Media
•
Removable:
•
Four (4) 5¼” x 1.72” and
•
One (1) 3½” x 1”
•
Internal:
•
Two (2) 3½” x 1” or
•
One (1) 3½” x 1.6”
Expansion Twenty (20) slots, including SBC