Owner`s manual

Operation

1. Refer to “Compatible Computers” on Page 13 or examine

the output connector of your computer’s AC adapter and

compare it to the Adaptaplugs supplied with your power

adapter.

2. Select the Adaptaplug that resembles the original plug and

test it by temporarily inserting it into the device to be pow-

ered. It is important that the center contact or pin be the

correct size to ensure proper electrical contact. If it is too

small or large, additional Adaptaplugs are available from

your RadioShack store.

Some computer models require the special Compaq plug.

3. Connect the Adaptaplug to the output socket at the end of

the power adapter’s cord.

If the tip on the device’s power jack is positive, align

(pos-

itive) marked on the Adaptaplug to

TIP

marked on the out-

put socket. If the tip on the device’s power jack is negative,

align

–

(negative)

TIP

. Then insert the Adaptaplug into the

device’s power jack.

TIP +

TIP –