User's Manual
Note:
O This alarm operation has a higher priority over the LOCK and broadcasting function.
After the input terminal has been triggered, only the alert tone would be heard.
O The Weatheradio alarm input is recommended to work with the extend output of
RadioShack model 12-250 and 12-258.
Follow these steps to connect the station to any weather radio that provide and alarm
output.
Connect the ALARM + terminal on the side of the station to your Weatheradio’s positive
(+) alarm terminal.
Connect the ALARM – terminal on the side of the station to your weatheradio’s negative
(-) alarm terminal.
Caution:
The Weatheradio alarm output should always connect to the unit which is intending to
engage in the Broadcasting mode frequently.
CARE
RS 90-day warranty
AO0089AAA1
02A02
43-3102
Printed in China