TM THE PERFORMANCE YOU NEED Wireless Amplified Stereo Speakers Please read this user’s guide before using your new speakers Please read this User’s User’s Guide XX-XXX User’s Guide 40-268
Contents Package Contents................................................................................................... 4 Features.................................................................................................................. 5 Setup....................................................................................................................... 5 1. Select a location............................................................................................ 5 2.
...... 4 ...... 5 ...... 5 ...... 5 ...... 6 ...... 6 ...... 8 .... 10 .....11 .... 12 Care.................................................................................................................. 14 Troubleshooting.............................................................................................. 15 Specifications.................................................................................................. 16 FCC Information........................................................
Package contents Speaker Feat Transmitter RCA jack to 3.5mm Plug (Y-Adapter) Ide En Tru Set 1S In orde AC Adapter for Speakers (2) AC Adapter for Transmitter Rubber feet (8) Po as aff Po the Try the 3.5mm to 6.
Ideal for use as rear-channel speakers in your surround-sound home theater. Enables you to listen to your stereo in any room of your home. True stereo sound, with individual bass and treble controls. Setup 1 Select a location In order to achieve the best performance: Position the transmitter as far as possible from other electronic devices such as TVs, receivers, or DVD players. Radio interference from these devices could affect your system’s performance.
Setup 2 Attach rubber feet to speakers Remove the backing on the bottom of the rubber feet and attach them to the four corners on the bottom of each speaker. You als batteri To ins 1. Re 3 Power ���������������� the system Connect the supplied AC power adapters into the DC 12V jacks on the transmitter and speakers, then plug the adapters into standard AC outlets. Speakers Transmitter 12V, 250mA 12V, 1250mA AC Adapter AC Adapter 2. Ins co 3.
Setup You also can use 16 (8 for each speaker) D size batteries (not supplied) to power the speakers. To install the batteries: LR20 LR20 3. Replace the cover when finished. LR20 LR20 correct polarities. LR20 LR20 2. Insert 8 batteries for each speaker with LR20 mitter LR20 1. Remove the battery cover. w Caution: You must use a Class 2 power source that supplies 12 volts DC and delivers at least 250mA or 1250mA.
Setup b Battery Notes 1. Co Using the AC adapter overrides any installed batteries. When the speakers POWER LED blinks, replace the batteries. Do not burn or bury batteries. Do not puncture or crush. Do not disassemble. Use only fresh batteries of the required size and recommended type. Do not use batteries of different types, capacities, or chemistry. Remove the batteries if you do not plan to use the product for an extended time.
ed p eek (white plug to L AUDIO IN and red plug to R AUDIO IN). 2. Connect to your audio source’s output jacks: Connect the white and red plugs at the other end of the cable into the corresponding left (white) and right (red) audio jacks on your audio source. Connect to your audio source’s stereo headphone jack: Connect the audio cable’s white and red plugs to the white and red jacks on the stereo side of the Æ-inch (3.5mm) supplied adapter. If your audio source has a Æ-inch (3.
Setup w Caution: Do not connect the transmitter to your audio source’s speaker output. It could damage the transmitter and the audio source. If you connected the transmitter to an audio source’s headphone jack, set the audio source’s volume control to its middle position. 5 Stereo/mono setup 6S 1. Se int 2. Se nN transm For normal stereo use, set STEREO/ MONO on the back of the transmitter to STEREO. If you are using a monaural system, set STEREO/MONO to MONO.
t the 6 Select channel 1. Set the transmitter to a frequency channel (CHANNEL 1, 2, or 3) that has no interference. 2. Set the speaker to the same channels as the transmitter. n Note: If you receive interference, try changing the channel number on the transmitter and the speakers.
Setup 7 Mount the speakers Bas To mount a speaker on the wall, you need two screws (not supplied) with a head that fits into the keyhole slot on the back of the speaker. Turn 1. Select a location and drill a hole to fit your screws. 2. Thread each screw into the hole until the screw’s head extends about 3/5 inch (15mm) from the wall. 3. Align the keyhole on the speaker with the screw head in the wall, then slide the speaker down gently to secure it. 1. Tu Th ad so tra mi 2. Ro sp 3.
ead de Turn on 1. Turn on your audio source. The transmitter has a built-in automatic ON/OFF controller. When the AC adapter is plugged in and the transmitter receives audio signals from the audio source, the transmitter’s power LED lights blue. The transmission stops if the transmitter does not receive audio signals from the audio source for about one minute. The transmitter’s power LED turns off. 2. Rotate VOLUME to ON to turn on your speakers���������������������������������� .
Additional Information Ke oc wC Listening Safety To protect your hearing, follow these guidelines when you use the speaker system. Additional Info Set the volume to the lowest setting before you begin listening. After you begin listening, adjust the volume to a comfortable level. Do not listen at extremely high volume levels. Extended high-volume listening can lead to permanent hearing loss. Once you set the volume, do not increase it.
Keep the system away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. w Caution: You might permanently damage your speakers by cleaning them ystem. with a vacuum cleaner. Use a feather duster or a soft cloth instead. u Troubleshooting ening We do not expect you to have problems with your speaker system; however, if you do have problems, try these troubleshooting tips. Problem No sound Solution Make sure the speakers are turned on.
Additional Info Audio is distorted Be sure the speakers and transmitter are set to the same channel. If the transmitter is connected to an audio source’s headphone jack, reduce the audio source’s volume. Change the position of the transmitter. The speakers are placed beyond the transmitter’s effective range (approximately 300 feet). Move the speakers closer to the transmitter.
nnel. e he aker’s ge the FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Ignition L.P. may cause interference and void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
nected. the itions: e by R proof se ith s, and rts and ducts For product support, call 1-866-315-0426 19 Additional Info ure to floods who dinary duct han the are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT STATED IN THIS LIMITED WARRANTY.
, Protect the environment by recycling used electronics. Go to E-CyclingCentral.com to find an electronic recycling center near you. Please read thisyour user’s guide before using your new speakers Get more from audio and video equipment. See what you’ve been missing. With Auvio, you control the experience. Auvio was established by a group of technophiles to provide high quality audio and video products without the high sticker price.
