User's Manual

20-523 Owner’s Manual
Page 35
ID delay. At 3rd line and
2.0 seconds at bottom line.
Press up or down to select None, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5 or 4.0 seconds.
Press ENTER.
Reviewing Locked-Out Talk Group IDs
Note: You cannot clear all lockouts from a talk group at the same time.
1. Press PGM then TRUNK.
2. Press FUNC then L/OUT. The locked out ID appears. If the ID memory bank has no locked out ID, you
hear the low beep tone.
3. Press FUNC then /¥ or ¥/ to select a search bank. Or, just press /¥ or ¥/ to search for any locked out IDs in
a bank.
Clearing Talk Group Ids
1. Press PGM then TRUNK.
2. Press FUNC, /¥ or ¥/ to select ID memory.
3. Press FUNC then CL.
Clearing All Talk Group IDs in One Bank
You can clear all talk group IDs within a bank. This lets you quickly delete all talk group IDs from a bank (for
example, if you want to use the bank to store a different set of talk group IDs).
1. Press PGM.
2. Press TRUNK to enter a talk group ID memory mode.
3. Select a talk group ID bank using FUNC, /¥ or ¥/.
4. Press FUNC then 6. Confirm list clear ? 1=YES Press other key for NO. appears.
5. Press 1 to clear the all talk group IDs within a bank. Please Wait then List Cleared appears.
Note: To cancel the deletion, press any key except 1. The scanner returns to the talk group ID memory
mode.
OPEN AND CLOSED MODES