User's Manual

20-523 Owner’s Manual
Page 34
Notes:
• If you made a mistake in Step 4, Invalid ID. appears and the scanner beeps when you press ENTER.
Start again at Step 3.
• You can enter either decimal or AFS code for ED ID. The default setting is decimal ID entry. When you
press FUNC then 2, AFS format appears for about 2 seconds. Now you can enter the ID code with AFS
format.
6. Press TEXT and enter the text tag for the ID, then press ENTER.
Invalid appears when you enter the incorrect ID code.
7. To store the next ID memory in sequence, press /¥ and repeat Steps 4 and 5 to enter more IDs.
8. Press SCAN to start scanning.
Talk Group ID Hold
You can set your scanner to follow a trunking signal that you want to track during scanning. Hold down
TRUNK for more than 2 seconds. ID hold ON. appears.
Add illust
To release ID hold, press SCAN or TRUNK.
Locking Out Talk Group IDs
Note: You can only lock out talk group IDs when the scanner is in the closed mode (see “Open and Closed
Modes” on Page XX).
1. Press PGM.
2. Press TRUNK.
3. Press FUNC, /¥ or ¥/ to move the desired bank.
4. Press /¥ or ¥/ to select the ID memory.
5. Press L/OUT to lock out the ID. L appears.
6. To remove the lockout from a trunking ID, manually select the ID memory, and press L/OUT until L
disappears.
Delay function in ID indication mode.
Press FUNC then ./Delay key.
LCD indicates Use up/Down at the 1st line,
Keys to set at the 2nd line