User's Manual

20-523 Owner’s Manual
Page 20
Search bank : SR3 Aircraft
Receive mode : AM
GROUP FREQUENCY (MHz) STEP (kHz)
108.000-136.9875 12.5
Search bank : SR4 Ham band
Receive mode : FM
GROUP FREQUENCY (MHz) STEP (kHz)
0 28.0000 – 29.7000 5
1 50.0000 - 54.0000 5
2 144.0000 - 148.0000 5
3 222.0000 - 225.00000 5
4 420.0000 - 450.0000 12.5
5 1240.0000 - 1300.0000 6.25
Search bank : SR5 Programmable limit search
Receive mode : FM (Default setting)
Follow these steps to select preprogrammed search banks and searchs them for active frequencies.
1. Press SEARCH to select your desired search bank.
Add ilast
2. In the marine and CB band you can select the channel by Manually or search. M marking at the top of
the second line shows manual mode. S shows search. Press desired channel number while M indication
with two digits to shift the channel. You can also change the channel by /¥ or ¥/ keys with search
direction.
3. Press FUNC then SEARCH while M indication then M changes to S and set search mode. Press FUNC
then SEARCH again to backward.
4. Rotates SQ control clockwise and leave it set to a point just after hissing sound stops. After the 2
seconds if Delay is turn on and LCD indicates Searching . . . to start search.
5. When the scanner finds an active frequency, it stops searching.
Search active frequency in your desired frequency range
You can program your desired frequencies range to search.
1. Press SEARCH and select SR5.
2. PGM then SEARCH. LCD indicates PSR for Program SeaRch at the top line and blinks L at the second
line for lower-end limit frequency.
3. Press your desired lower-end limit frequency with number and decimal point key.