User's Manual

20-523 Owner’s Manual
Page 10
TRUNK – stores the trunking ID code or holds the trunking ID while scanning.
PRI (Priority) – sets and turns the priority function on or off.
TEXT – lets you input text.
PAUSE – stops search or scan.
MODE – changes the receive mode (AM, FM, MO, ED). See “Changing the Receive Mode” on Page XX.
(Light Symbol)/(Key Symbol)– turns on/off the display’s backlight or locks/unlocks the keypad to prevent
accidental entries.
TUNE – lets you input a frequency and allows you to fine tune a frequency along with /¥ or ¥/.
ATT (Attenuate) – turns attenuation on to reduce the scanner’s sensitivity, or turns it off to increase it.
/¥ or ¥/ – selects the search direction during frequency search or tuning.
SEARCH – lets you search the six search banks.
L/OUT (Lock Out) – lets you lock out a selected channel, skip a specified frequency during search, or lock
out a selected ID code.
PGM – programs frequencies into channels.
ENTER – lets you complete the entry of frequencies and text.
A LOOK AT THE KEYPAD
Your scanner’s keys might seem confusing at first, but this information should help you understand each
key’s function.
Add Illust
1 – enters a 1, or inputs characters 0 through 9.
2/ABC – enters a 2, or inputs characters A, B, or C.
3/DEF – enters a 3, or inputs characters D, E, or F.
4/GHI – enters a 4, or inputs characters G, H, or I.
5/JKL – enters a 5, or inputs characters J, K, or L.