User's Manual

20-466 Owner’s Manual
Page 8
Illust
SCAN – scans through the programmed channels.
FUNC (function) – lets you use various functions by pressing this key along with other keys.
MAN – stops scanning and lets you directly enter a channel number.
WX – scans through the 7 preprogrammed weather channels.
TRUNK – stores the trunking ID code or holds the trunking ID while scanning.
PRI (Priority) – sets and turns the priority function on or off.
TUNE – lets you input a frequency and allows you to fine tune a frequency along with /¥ or ¥/.
ATT (Attenuate) – turns attenuation on to reduce the scanner’s sensitivity, or turns it off to increase it.
TEXT – lets you input text.
PAUSE – stops search or scan.
/¥ or ¥/ – selects the search direction during frequency search or tuning.
L/OUT (Lock Out) – lets you lock out a selected channel, skip a specified frequency during search, or lock
out a selected ID code.
CLEAR – clears an incorrect entry.
MODE – changes the receive mode (AM, FM, MO, ED). See “Changing the Receive Mode” on Page XX.
SEARCH – lets you search the ten search banks.
PROG – programs frequencies into channels.
1 – enters a 1, or inputs characters 0 through 9.
2/ABC – enters a 2, or inputs characters A, B, or C.
3/DEF – enters a 3, or inputs characters D, E, or F.
4/GHI – enters a 4, or inputs characters G, H, or I.
5/JKL – enters a 5, or inputs characters J, K, or L.
6/MNO – enters a 6, or inputs characters M, N, or O.
7/PQRS – enters a 7, or inputs characters P, Q, R, or S.
8/TUV – enters a 8, or inputs characters T, U, or V.