User's Manual

20-466 Owners Manual
Page 43
1. Turn off the scanner, then turn it on again. Welcome To Dual Trunking appears.
2. Press 0 then 1 while Welcome To Dual Trunking appears. Initializing Please Wait. appears for about 25
seconds
Note: Do not turn off the scanner until the initialization is complete and Welcome To Dual Trunking appears
again.
Care
To enjoy your RadioShack Base Scanner for a long time:
. Keep the scanner dry. If it gets wet, wipe it dry immediately.
. Use and store the scanner only in normal temperature environments.
. Handle the scanner gently and carefully. Do not drop it.
. Keep the scanner away from dust and dirt.
. Wipe the scanner with a damp cloth occasionally to keep it looking new.
Modifying or tampering with the scanners internal components can cause a malfunction and might
invalidate its warranty and void your FCC authorization to operate it. If your scanner is not performing as it
should, take it to your local RadoShack store for assistance.
Specifications
Frequency Coverage:
25-54 MHz (in 5 kHz steps)
108-136.9875 MHz (in 12.5 kHz steps)
137-174 MHz (in 5, 6.25 or 7.5 kHz steps)
406-512 MHz (in 6.25 kHz steps)
806-823.9875 MHz (in 6.25 kHz steps)
849-868.9875 MHz (in 6.25 kHz steps)
894-960 MHz (in 6.25 kHz steps)
1240-1300 MHz (in 6.25 kHz steps)
Memory channel 300
Channel memory Banks 10
Number of channel memory/bank 30
Talk group ID memory 1,000
ID memory Banks 10
Sub-bank 5
Number of ID memory/sub-bank 20
Sensitivity (20 dB S/N):
FM:
25-54 MHz 0.3 uV