User's Manual

20-466 Owners Manual
Page 42
manually. See Birdie Fre-
quencies on Page XX.
------------------------------------------------------------------------------------------------------------------
In the scan Stored frequencies are theAvoid storing birdie frequencies
mode, the same as birdie frequencies. or only select them manually. See
scanner locks Birdie Frequencies on Page XX.
on frequencies
that have an
unclear transmission.
------------------------------------------------------------------------------------------------------------------
Scanner is No power. AC adapter or DC adapter is
totally inoper- connected properly.
ative.
--------------------------------------------------------------------------------------------
The AC adapter or DC adapter is Be sure the adapters barrel plug
not connected. is fully plugged into the DC 12V
jack.
------------------------------------------------------------------------------------------------------------------
Keys do not Undetermined error. Turn the scanner off then on again,
work or display or reset the scanner. See
changes. Resetting/Initializing the Scanner.
------------------------------------------------------------------------------------------------------------------
RESETTING/INITIALIZING THE SCANNER
If the scanners display locks up or does not work properly after you connect a power source, you might
need to reset or initialize it.
Important: If you have problems with the scanner, first try to reset it to retain all memory. If that does not
work, you can initialize the scanner; however, initializing clears all information stored in the scanners
memory.
Resetting the Scanner.
1. Turn off the scanner, then turn it on again.
2. Insert a pointed object, such as a straightened paper clip, into the reset opening on the back of the
scanner. Then gently press and release the reset button inside the opening.
Add illust
Note: Pressing RESET does not clear the scanners memory.
Initializing the Scanner
Important: This procedure clears all information you stored in the scanners memory. Initialize the scanner
only when you are sure the scanner is not working properly.