User's Manual

20-466 Owners Manual
Page 33
1. Press PROG then TRUNK.
2. Press FUNC, or ¥/ to select ID memory.
3. Press FUNC then CLEAR.
Clearing All Talk Group IDs in One Bank
You can clear all talk group IDs within a bank. This lets you quickly delete all talk group IDs from a bank
(for example, if you want to use the bank to store a different set of talk group IDs).
1. Press PROG.
2. Press TRUNK to enter a talk group ID memory mode.
3. Select a talk group ID bank using FUNC, or ¥/.
4. Press FUNC then 6. Confirm list clear ? 1=YES Press other key for NO. appears.
5. Press 1 to clear the all talk group IDs within a bank. Please Wait then List Cleared appears.
Note: To cancel the deletion, press any key except 1. The scanner returns to the talk group ID memory
mode.
OPEN AND CLOSED MODES
When set to the open mode, the scanner only uses the ID list to look up ID text tags and stops on any ID
code.
When set to the closed mode, the scanner stops only on signals that have an ID code which is found in the
ID list for the bank.
Note: When you select a channel manually, any transmission opens squelch, regardless of the current
mode.
Add illust
The open or closed mode is set in each channel storage bank. + or appears under the channel storage
banks number while scanning. Or, the status display shows the OPEN/CLOSED mode at the top line
while the scanner is in manual mode or receiving a signal during scanning.
When no ID code is programmed into the scanner, it receives the signal in MOT or ED mode.
Mode Open Closed
-------------------------------------------------------------------------------------------------------------------------------
MOT/ED Stops on any transmission. If the Only stops on a transmission if the ID is