User's Manual

20-466 Owner’s Manual
Page 24
If all locked out frequencies are cleared within a bank, L/O list is empty. appears.
Clearing All Lock Out Frequencies in a Search Bank
1. Press SEARCH.
2. Turn on only one search bank, the one in which you want to clear all locked-out frequencies.
3. Press FUNC then press L/OUT. Lockout list appears on the displays 4
th
line.
4. Press FUNC then 6. Confirm list clear? 1=YES Press other key for NO. appears. Press 1 to clear all
lock-out frequencies and List cleared appears for about 2 seconds. Press any key other than 1, to
cancel clear.
Note: You cannot clear all lock-out frequencies if all frequencies in the selected bank are locked out.
PRIORITY
With the priority feature, you can scan through programmed channels and still not miss an important or
interesting call on a specific channel. When priority is turned on, the scanner checks that channel every 2
seconds, and stays on the channel if there is activity until the activity stops.
There is one priority channel separated to 300 channels memory frequency.
Notes:
• The priority feature does not operate while the scanner receives trunking frequencies.
• If you program a weather channel as the priority channel, the scanner stays in the priority channel only
when the scanner detects the weather alert tone.
Follow these steps to program a channel as the priority channel.
1. Press MAN.
2. Use the number keys to enter the channel number you want to program as the priority channel. Then
press MAN again.
3. Press FUNC then PRI. PRI Channel blinks at the bottom line.
4. Press ENTER.
If you program priority channel directly, you use following procedure.
1. Press PROG.
2. Press PRI.