User's Manual

20-466 Owner’s Manual
Page 23
have a continuous transmission, such as a weather channel.
Locking Out Channels
To lock out a channel while scanning, press L/OUT when the scanner stops on the channel. To lock out a
channel manually, select the channel then press L/OUT until L appears.
Notes:
• You can still manually select locked-out channels.
To remove the lockout from a channel, manually select the channel and press L/OUT until L disappears.
Reviewing the Lock-Out Channels
To review all channels that are locked out, press MANUAL, then repeatedly press FUNC then L/OUT to
view each locked-out channel. When you finish reviewing locked-out channels, press MAN.
Locking Out Frequencies
To lock out a frequency during a search, press L/OUT when the scanner stops on the frequency. The
scanner locks out the frequency, then continues searching.
Notes:
• The scanner does not store locked out frequencies during a search.
• You can lock out as many as 50 frequencies in each bank. If you try to lock out more, Memory full!
appears.
• If you lock out all frequencies in one search bank and only this search bank is activated, All ranges
Locked out! appears and the scanner does not search.
Reviewing Locked-Out Frequencies
Follow these steps to review the frequencies within a search bank that you locked out.
1. Press SEARCH to set search mode.
2. Press FUNC then L/OUT in search. The locked-out frequency and Lockout list appear. The locked-out
number and the total locked-out number also appear as L/O XX of YY. If the search bank has no
locked-out frequencies, Empty. Lockout list appears. Press FUNC then L/OUT again to cancel
reviewing locked-out frequencies.
Add illust
Clearing a Locked-Out Frequency
To clear a locked-out frequency, select that frequency in order to use the locked-out frequencies review
function, then press CLEAR.