User's Manual

20-466 Owner’s Manual
Page 21
Turning Channel-Storage Banks Off and On
To turn off banks while scanning, press the bank’s number key until the bank’s number disappears. The
scanner does not scan any of the channels within the banks you have turned off.
Notes:
• You cannot turn off all banks. There must be at least one active bank.
• You can manually select any channel in a bank, even if the bank is turned off.
To turn on banks while scanning, press the number key until the bank’s number appears.
MANUALLY TUNING A FREQUENCY
1. Press TUNE. TUNE and current frequency appears.
2. Use the number keys to enter the frequency you want to start to tune.
3. Press ENTER.
4. Press /¥ or ¥/ to move up or down. When the scanner finds an active frequency, it stops tuning.
Note: If you press PAUSE key while tuning, the scanner stops tuning and **PAUSED ** appears on the
display. Press PAUSE key again, the scanner continues tuning.
DELETING FREQUENCIES FROM CHANNELS
1. Press MAN.
2. Use the number keys to enter the channel with the frequency you want to delete.
3. Press MAN again.
4. Press PROG to enter the program mode. M changes to P.
5. Press FUNC.
6. Press CLEAR. The frequency number changes and 0.0000 MHz appears.
LISTENING TO THE WEATHER BAND
The FCC (Federal Communications Commission) has allocated channels for use by the National Oceanic
and Atmospheric Administration (NOAA). Regulatory agencies in other countries have also allocated
channels for use by their weather reporting authorities.
NOAA and your local weather reporting authority broadcast your local forecast and regional weather
information on one or more of these channels.