User's Manual

20-315 Owner’s Manual
Page 38
CARE AND MAINTENANCE
Your RadioShack PRO-82 200 Channel VHF/Air/UHF Hand-Held Scanner is an example of
superior design and craftsmanship. The following suggestions will help you care for your
scanner so you can enjoy it for years.
Keep the scanner dry. If it gets wet, wipe it dry immediately. Liquids might contain minerals
that can corrode the electronic circuits.
Use and store the scanner only in normal temperature environments. Temperature
extremes can shorten the life of electronic devices and distort or melt plastic parts.
Keep the scanner away from dust and dirt, which can cause premature wear of parts.
Handle the scanner gently and carefully. Dropping it can damage circuit boards and cases
and can cause the scanner to work improperly.
Use only fresh batteries of the required size and recommended type. Batteries can leak
chemicals that damage your scanner’s electronic parts.
Wipe the scanner with a damp cloth occasionally to keep it looking new. Do not use harsh
chemicals, cleaning solvents, or strong detergents to clean the scanner.
Modifying or tampering with the scanner’s internal components can cause a malfunction
and might invalidate its warranty and void your FCC authorization to operate it. If your
scanner is not performing as it should, take it to your local RadioShack store for assistance.
SPECIFICATIONS
Frequency Coverage (MHz):
10 Meter Amateur Radio ..................... 29–30 (in 5 kHz steps)
VHF Lo ................................................ 30–50 (in 5 kHz steps)
6 Meter Amateur Radio ....................... 50–54 (in 5 kHz steps)
Aircraft ............................... 108–136.9875 (in 12.5 kHz steps)
Government .................................... 137–144 (in 5 kHz steps)
2 Meter Amateur Radio ................... 144–148 (in 5 kHz steps)
VHF Hi ............................................ 148–174 (in 5 kHz steps)