User's Manual

20-315 Owner’s Manual
Page 27
in a one touch bank. Or, if you do not want to clear the lockouts, press
TUNE/CLEAR.
Removing Lockouts From All Frequencies
1. Hold down L/O L/O RVW for about 2 seconds during a search of tune.
L-r
appears.
2. While holding down TUNE/CLEAR, press L/O L/O RVW.
Flo ALL-CL
appears.
3. Press
ENT. The scanner clears any lockouts from all frequencies (except in the marine
bank). Or, if you do not want to clear the lockouts, press TUNE/CLEAR.
USING PRIORITY
The priority feature lets you scan through channels and still not miss important or
interesting calls on a frequency you select. You can program one frequency into the priority
channel. As the scanner scans, if the priority feature is turned on, the scanner checks the
priority channel for activity every 2 seconds.
1. Press
PGM, then press PRI/ALERT.
PCH
and
000.0000
or the previously-stored
frequency appear.
2. Enter the frequency you want to enter into the priority channel, then press
ENT. The
display flashes twice.
To turn on the priority feature, press
PRI/ALERT during scanning or searching.
PRI
appears.
The s to scanner checks the priority channel every 2 seconds and stays on the channel if
there is activity.
PCH
and the frequency appear whenever the scanner is set to the priority
channel.
To turn off the priority feature, press PRI/ALERT.
PRI
disappears.
Note: If you program a weather frequency into the priority channel and the scanner detects
a WX alert tone on that frequency (see “WX Alert” on Page 23), the scanner sounds the
alert tone and
ALErt
flashes. Press any key to turn off the alarm.
USING THE DISPLAY BACKLIGHT
You can turn on the display’s backlight for easy viewing in the dark. Press (light/key
symbol) to turn on the light for 5 seconds. To turn off the light sooner, press (light/key
symbol) again.
Press both PGM and (light/key symbol) to turn on the display’s backlight for an extended