User's Manual

20-315 Owner’s Manual
Page 13
WX
Indicates that the scanner is searching the weather channels.
FD/PD
Indicates that the scanner is searching the fire/police bank.
AIR
Indicates that the scanner is searching the aircraft bank.
HAM
Indicates that the scanner is searching the amateur radio bank.
^/v Indicates the search or scan direction.
CH
Appears with digits (1–200) or
P
to show which channel the scanner is tuned to.
B
Appears when the batteries are low.
L/O (lockout) Appears when you manually select a channel that was previously
locked out during scanning or when you review a locked-out frequency.
SRCH
Appears during service bank and direct frequency searches.
SCAN
Appears when the scanner scans channels.
MAN
Appears when you manually select a channel.
PGM
Appears when you program frequencies into the scanner’s channels.
PRI
Appears when the priority feature is turned on.
DLY
Appears when you program a 2-second delay.
b X -FULL
Appears when you try to enter a frequency during a search when all
displayed banks channels are full.
-dUPL-
Appears when you try to store a frequency that is already stored in another
channel.
DEFAULt
Appears when you remove all the lock-outs from the FD/PD, AIR, or
HAM bank frequencies.
D-Error
Appears when the scanner receives a data error during wired programming.
End
Appears when the scanner has finished wired programming.
Error
Appears when you make an entry error.
FLo ALL-CL
Appears when you remove all the locked-out frequencies during a
FD/PD, AIR, or HAM bank or tune.
FLo-FULL
Appears when you try to lock out a frequency during a tune when 50
frequencies are already locked out.
F L-out
Appears when you start a tune from a locked-out frequency.
L-r
Appears when you review the locked-out frequencies.
oFF tonE
Appears when you turn the key tone off.
on tonE
Appears when you turn the key tone on.
P
Appears when the scanner is tuned to the priority channel.
StArt
Appears when the scanner starts wired programming.
-t-
Appears during a direct frequency search.