User's Manual

Note: The extender system’s LEDs (particularly the transmitter’s) might blink occasionally. This is
caused by interference in the local vicinity and is normal.
[THE FCC WANTS YOU TO KNOW wordings here]
[CARE wordings here]
SPECIFICATIONS
Power Supply 120VAC/60Hz, 12VDC/120mA
Transmitter
Transmit Frequency 418 MHz
Modulation Type ASK
Transmit Power (EIRP) 1mW (FCC)
Frequency Accuracy ±1 MHz
Remote Range (R/C to TX) 20 Feet, Vertical ± 30°/Horizontal ± 15° .
Extension Range (TX to RX) 100 Feet Min.
Receiver
Operation Frequency 418 ± 1 MHz
Input Sensitivity 85dB Min.
Remote Range (RX to VCR) 20 Feet, Vertical ±30°/Horizontal ±15°
External IR Jack 2.4 mm
Operating Temperature 32° to 104° F (0° to 40°C)
Dimensions (HWD) 2 5/8 x 3 7/8 x 3 1/16 Inches
(66 x 99 x 78 mm)
Weight
Receiver 3.17 oz (90 g)
Transmitter 3.53 oz (100 g)
Specifications are typical; individual units may vary. Specifications are subject to change and
improvement without notice.
90 days warranty
05A02
RadioShack Corporation 15-1950
Fort Worth, Texas 76102 Printed in China