Installation guide

D9412G/D7412G Operation & Installation Guide
© 2002 Radionics Page 13 43488D
D9412G/D7412G
Overview
2.0 Overview
Figure 1: System Configuration
2.1 D9412G/D7412G Differences
The table below provides an overview of the differences between the D9412G and D7412G panels.
Table 3: Differences Between the D9412G and D7412G
New Features D9412G D7412G
Access Control YES, 8 Doors YES, 2 Doors
Expanded Users
Arm/Disarm Passcodes
Cards/Tokens
249
996
99
396
Passcode-Protected Custom
Functions
16 4
Number of Printers 3 1
Number of Points 246 75
Number of Relays 128 64
Use command centers and/or ke
y
switches to arm the
panel b
y
area. Each panel can have up to ei
g
ht areas.
Each area can have its own account number or areas
can be
g
rouped to
g
ether with a common account
number. Points of protection are assi
g
ned to areas.
Control/
Communicator
On-Board Points
1 to 8
D9131A Module connects
to a parallel printer to print
the event lo
g
.
D928 Module allows the panel
to monitor two phonelines.
D8129 OctoRela
y
provides alarm
and auxilliar
y
rela
y
output.
(Other functions available.)
D9210B Modules ma
y
be
used for access control.
D8125 or D8125MUX Interface
used for point expansion.
Each D8128D OctoPOPIT combines
ei
g
ht POPIT points in one module.
D8132 Modules (two 12 VDC, 7Ah batteries)
provide additional power for command
centers and other powered devices.
D9133TTL-E allows
communication over
a Local or Wide Area
Network