Installation guide

D6600 NetCom
Operation
D6600 NetCom System Guide
4998122712D Page 14 © 2004 Bosch Security Systems
4.
Right-click on the icon and
select Properties from the
context menu that appears.
5.
Scroll down in the ”Components checked are used by
this connection:” list and highlight the “Internet Protocol
(TCP/IP)” component.
6. Highlight the protocol icon for
TCP/IP bound to your NIC card
and click the "Properties…"
button.
7. Once the dialog box appears, there will be only one tab called “General.”
Click on the option “Use the following IP address:” and
enter an IP address and subnet mask for the network you
will be setting up, such as 202.96.168.1.
Note: If you have any questions regarding the assignment of
the IP address or subnet mask, see the network
administrator.
All devices that will be on this network must have the correct subnet
mask and gateway entered.
8. Some files may have to be copied to the computer. This
may require Microsoft
®
Windows
®
operating system disk
for the appropriate version you are using.
9. After copying the files, the PC may have to be restarted. If so, connect the Host PC's NIC card to the
network (hub) and restart the PC.