Installation guide
D6600/D6100 | Operation and Installation Guide | 1.0 Introduction
.
Bosch Security Systems | 4/05 | 4998122704F 5
1.0 Introduction
The D6600/D6100 Communications
Receiver/Gateways offers several unique features:
• Modular construction with plug-in circuit boards
for quick, easy service
• Open structure PC platform for future
development
• Programmable formatting for receiving data from
most major brands of digital communicators
• Easy and inexpensive updating using modular
cards (D6600 only)
• Convenient software downloads
• Superior digital signal processing to reduce noise
and signal loss
• User interface module with LED indicators
• Front panel keypad
• Alphanumeric liquid crystal display (LCD)
The D6600 metal enclosure contains several modular
cards:
• D6610 Central Processing Unit (CPU) Card
• D6615 CPU Terminator Card
• D6640 or D6641 Telephone Line Card that
supports four telephone line interfaces
• D6645 Telephone Line Terminator Card
Up to seven additional telephone line cards along with
seven additional line terminator cards can be installed
in the D6600 to expand the receiver’s capacity to 32
receiving lines.
Table 1: D6600/D6100 Supported
Communication Formats
Acron Super Fast ROBOFON*
Ademco Slow Scantronics Scancom*
Ademco Express Seriee FSK/DTMF*
Ademco High Speed Sescoa Super Speed
Ademco Contact ID SIA 8/20/300
CFSK Bell/V.21* SIA ADT*
FBI Superfast SIA V.21*
Franklin/Sescoa Silent Knight Fast
ITI* Silent Knight FSK
Radionics BFSK Standard Pulse Formats
Radionics Hex Sur-Gard DTMF
Radionics Modem II Telim*
Radionics Modem IIe/IIIa
2
Veritech FSK
RB2000 (D6641 only)* VONK (D6641 only)*
* Not investigated by UL.
Use a printer to permanently record date, time, group
number or transmission format and line number,
account number, receiver number, and event by area,
zone, and point. The printer tape and the
D6600/D6100 LCD display show other receiver status
messages such as software revision levels of the CPU
Card.
Program the D6600/D6100 using the front panel
keypad or the COM4 port with the D6200
Programming Software package.
NetCom refers to the D6600 with the optional D6680
Network Adapter. It supports data network
communications including an account database
capacity of up to 3200 accounts with the optional
D6201 Security Key. Refer to Section 11.0 Network
Communications on page 27 for more detailed
information.
The D6600/D6100 works with the following Bosch
Control Panels (referred to throughout this manual as
“Bosch Control Panels”):
• D9412G
• D7412G
• D7212G
• D9412
• D7412
• D7212
• D9112