Installation guide

D6600 NetCom

D6200 Programming Software Overview

D6600 NetCom System Guide

4.8 Reading D6600 Configuration Files Using the D6200

To read the CPU Host and Network configuration files from the D6600, follow these steps.

1. Click on the File menu and select Read Configuration from D6600.

A communication status window appears.

2. Click OK to close the status window once

file transfer is complete.

The D6600’s CPU Host, Network and Line Card

configuration files are now located in the D6200

Program.

Keep in mind that these files now reside in RAM memory and are available for editing. However, if

any changes are made you must save a copy to the hard drive for archival purposes and you must

send the files to the D6600 to allow it to operate using the new configuration.