Installation guide
D6600 NetCom
D6200 Programming Software Overview
D6600 NetCom System Guide
© 2001 Radionics Page 39 46542C
2.
Click Delete.
A window will pop up to confirm the deletion.
3. Click Yes.
4.5 D6200 Save and Restore User Management Files
Once the user configurations have been completed, click the Close button. This will save the user Configuration
file to a hidden file in the D6600 Receiver. This file can be advantageous when performing D6200 upgrades, so
that all user configurations can be updated. After a new version of the D6200 has been installed, click the
Restore button in the new D6200 Software, and the previously setup user configurations will now be loaded into
the new D6200.
4.6 Changing User Password
The currently logged in user can change his/her password at anytime. To do so, follow the steps below.
1. Click on the Settings menu and select Change Password.
2. A Password Check window will appear. Enter the User ID and
Password.
Note: If the name and password entered are inconsistent with the currently logged in user, an error message will occur
and the operation will be canceled.
3. If the correct name and password have been entered, a
Change Password window will pop up. Enter the new
password twice for verification.
4. Click Change to accept the new password.