Installation guide

D6600 NetCom

D6200 Programming Software Overview

D6600 NetCom System Guide

Double click the CPU-D6610 V01.01.01

subfolder to open it. The folder icon should

change to an open folder. In the right pane of

the Explorer window, you should see the CPU

firmware file, CPU.exe

4. Double click the CPU firmware file. A window should then open that

tells you that by clicking the OK button, the software will be installed

on your computer. Click OK.

5. A window will then briefly display identifying that the extraction process is being performed.

Once the extraction of the CPU software file is complete, the window

will disappear. Loading the D6600 CPU software from the CD to your

computer is now complete

7. You must now launch the D6200 Software. It will be used to load the

newly extracted software into the D6600. After the program initiates,

click on the Programming and select Software Upgrade Wizard.

8. A window will then be displayed. The program

must then be told which software files you

would like to send to the D6600. Select CPU

files then click ‘Next’.

9. After selecting the file you wish to upgrade, see

section 7.0 of the D6600 Release Notes (P/N:

39660), click Next. A warning window will be

displayed that instructs you to make sure you

are upgrading the proper files.