Instructions for Use

21
(Note: In the interface of adjusting the value, return to the initialvalue"0"by
pressing
“Dec(-)” and “Inc(+)” buttons simultaneously for about 1 second.)
Press “Enter” button, the adjusted value stops blinking, now the value has been set.
"-3":Brake application time becomes shortest. (Brakes lock with difculty)
"+3":Brake application time becomes longest (Brakes lock easily)
(Remark) For low grip, set at the - side and for high grip, set at the + side.
Duty ratio (DTY)
-3 ~ 0 ~ +3
Initial value; 0
6. (Steering mixing setup)
Select setting item "STM"by pressing“Dec(-)”or “Inc(+)”button,then press
“
Enter”
key and the initial value of “STM” will blink.Use “Dec(-)” or “Inc(+)”button to
adjust the steering mixing range.
(Note: In the interface of adjusting the value, return to the initial value"OFF" by
pressing “Dec(-)” and “Inc(+)” buttons simultaneously for about 1 second.)
Press “Enter” button, the adjusted value stops blinking,now the value has been set.
- Sets the range within which the A.B.S. function is performed relative to steering
wheel operation.
Steering mixing (STM)
OFF, N10 ~ N100, E10 ~ E100
Initial value; OFF
When steering mixing is set and steering operation enters the set range,"*" is
displayed in front of the number. When mixing is OFF, the
A.B.S
function
can
operate
over the entire steering range.