User manual

RADIOLINK ELETRONIC LIMITED
www.radiolink.com
3
4. Keep the antennas away from the motor, ESC, and other noise source as much as possible.
*The two antennas should be placed at 90 degrees to each other.
*The Illustration demonstrates how the antenna should be placed.
*Receiver Vibration and Waterproofing: The receiver contains precision electronic parts. Be sure
to avoid vibration, shock, and temperature extremes.
For protection, wrap the receiver in foam rubber or other vibration-absorbing materials.
It is also a good idea to waterproof the receiver by placing it in a plastic bag and securing the
open end of the bag with a rubber band before wrapping it with foam rubber. If you accidentally
get moisture or fuel inside the receiver, you may experience intermittent operation or a crash. If
in doubt, return the receiver to our service center for service.
Specification:
1. Channels: 12 channels
2. Working voltage: 4.8-6V
3. Working current: 40-180mA（input voltage: 5V）
4. Size: 30*15 mm
5. Weight: 2.5g
6. Detachable antenna
7. 4096 section precision, 0.5us per section, servo anti-shake rudder.
8. Control distance: about 4000 meters air, actually control distance depends on the
environment.