User Manual
Table Of Contents
Radiolink Electronic Ltd
www.radiolink.com
8
software then click WRITE to copy them to T8S.
There are four parameter setup menus: SERVO/BASIC/ADVANCED/SYSTEM
3.3.1 SERVO Menu
The 8 rectangles shows the CH1-CH8 servos range(4 basic channels and 4 auxiliary channel) from left to right.
Ch1 - Aileron, Ch2 - Elevator, Ch3 - Throttle, Ch4 - Rudder, Ch5 to Ch8 - Auxiliary channels
3.3.2 BASIC Menu
There are six parameters to setup including ”REV”“SUB”“EPA-L”“EPA-R”“F/S”“DELAY”
REV: Defines the relationship between the transmitter controls and the receiver output for channels with
options of NORM and REV. Make sure to check all servos move to the correct direction as wish under control.
Make sure to check all servos move to the correct direction under control.