User Manual

ADJUSTABILITY:

• SWITCH G (AT10II) or E (AT10II) is programmed for normal (NORM), idle-up 1 (IDLE-UP1), and

idle-up 2 (IDLE-UP2) curves, adjustable in CONDITION SELECT (IDLE-UP1/2, IDLE-UP3 items).

(IDLE-UP1/2 3-position type switch only, IDL3 2-position type switch only)

• Activated with the throttle curve for that condition in THR-CURVE.

• Curves are adjusted to maintain constant RPM even when the collective pitch is negative (inverted). Note

that REVO mixing has one curve for idle-ups 1 and 2 and a second curve just for idle-up3.

•Gyro settings may be set separately for each idle-up.

• Governor settings may be set up to follow Normal/Idle1/Idle2, but do not offer a setting to adjust for

each of the 5 conditions like gyro.

• Activating OFFSET makes the TRIM LEVERS adjust the trim separately in each of the idle-up

conditions.