User Manual

11
The above listed receiver and channels is referred to the channel 1~10 of the receiver R10DS, connect the
receiver with the related servo, you can control the servos by the correspondent switch.
To be clear, the servo connected with the receiver channel 1 is controlled by the radio aileron lever; servo
connected with channel 2 is controlled by elevator lever; servo connected with channel 3 is controlled by
throttle stick; servo connected with channel 4 is controlled by the rudder lever. Channel 5~10 can be self-set
with the related switches by the menu AUX-CH, and the sub menu. For SBUS signal channel, is output by
the 3 pin of 11 row.
Both SBUS and PWM signal shows with red LED.
Receiver all channels show:
6
Pitch(collective pitch)
7
Spare/governor
8
spare/mixture control
9
Spare
10
spare